| High Tide Dry Suits, Inc. is a Pacific Northwest scuba diving drysuit manufacturing company. Based in Olalla, Washington, High Tide makes custom scuba diving dry suits for cold water diving. High Tide is the warmest and the best quality scuba diving drysuit, dry suit out there. This drysuit is the best for cold-water scuba diving; including but not limited to Alaska, Alaskan scuba diving, The Great Lakes diving, the Pacific Northwest, Puget Sound, Hood Canal, Bremerton, Poulsbo, Southworth, South Colby, Manchester, Gig Harbor, peninsula, scuba, scuba diving, kitsap county, south kitsap, pierce county, retail, stahlsac, baker fullbody hanger, neoprene, latex seals, diving, Kevin Parkhurst, Eric Morris, Octopus Tales, "Octopus Tales", Northwest Dive News, quality, scuba gear, High Tide scuba gear dealers, dive stores, High Tide scuba gloves, scuba boots, scuba hoods, 5.0mm Sea-Scale gloves, Pro Boots, Ranger Boots, 3.5mm Sea-Scale gloves, Kevlar, Armortex, zippered dry hoods, hoods. We have four High Tide Dry Suit Systems. Some divers earn their living from working beneath the sea. Mike Kesl (shown here in his High Tide suit) is one of those. For over forty years Mike has done salvage work, dam inspection, big ship repair and underwater pipe construction. And there are lots of divers like him – those who dive in demanding conditions - scuba instructors, marine biologists, aquarium divers, sea food harvesters, deep water tech divers, military and serious divers. For these people High Tide designed the PRO dry suit. Made from 5.0 mm compressed neoprene made to withstand repeated diving as deep as 230 feet. The outer jersey is made from Triplemesh® – a heavy nylon armor which is nearly impervious to rough and sharp objects. Boots are our own Rocklug® insulated boots with cleated soles, fin strap tabs, arch support and thick soles that will prevent your feet from being bruised. We even include extra wide suspenders so you can cool down between dives. Every suit is custom made for the owner – included in the price. This assures a quality fit in critical areas such as leg and torso length, seals and zipper size. Each system comes with a custom made 100 gram fleece jumpsuit which not only adds warmth but wicks away sweat and condensation to keep you warm. There is no warmer suit on the market. A layering vest is also included for deep dives or long immersion times. Transporting your system is easy since it comes packed in an awesome wet/dry cargo bag with dry pockets inside for paperwork. You even get a special wide hanger for storing your suit between dives. Everything about this suit is top quality and made to last. Definitely not an “off the shelf experience”. Scuba Supplies, Washington Divers, TLSea Diving, Capital Divers Underwater Sports, Seattle, Tacoma Scuba, Olympia, The Scuba Connection, Seattle Scuba Schools, Sound Dive Center, Northwest Sports Diver, Eugene Skin Diving, Advanced Diving Technologies, Action Sports and Travel, Scuba Outfitters, Horizon Water Sports, Adventure Sports, Dive Magic, Underwater Works, Mar-vel International, Inc., wholesale scuba, custom-made scuba drysuits. Each High Tide PRO system includes the following:
Then High Tide has the SE scuba diving drysuit, or rather, the Special Edition. This suit is our most popular dry suit. We also have the Ti drysuit system which was originally designed with women in mind as the armor on the outside of the suit is not as tough, constraining and heavy. The Ti dry suit system name comes from the fact that there are two layers of titanium foil underneath the nylon of the suit. The Sport drysuit is our most economical. |
 | |  | |  | |  | |  | |  | |  |
| Take a peek inside the world’s best wetsuit boot |
Because the designer of all High Tide products is
an active diver in the cold water regions of the
pacific northwest (and 12 seasons in Alaska), he
remembers all too well how frozen his toes used to
get and how often he’d bruise his heels hiking
down those rock trails to reach dive sites. Sure
there were lots of dive boot brands to chose from,
but they all had thin, flat heels that offered little
protection and poor support. And they were made
from inexpensive foam neoprene so they crushed
out fast and got even colder. So he set out to
change all that.
First he realized that good athletic shoes had
some common traits which made them superior
over the old style of flat tenny runners. These
included raised heels, hollow air chambers for
cushioning, side rails to keep feet firmly in place
an active diver in the cold water regions of the
pacific northwest (and 12 seasons in Alaska), he
remembers all too well how frozen his toes used to
get and how often he’d bruise his heels hiking
down those rock trails to reach dive sites. Sure
there were lots of dive boot brands to chose from,
but they all had thin, flat heels that offered little
protection and poor support. And they were made
from inexpensive foam neoprene so they crushed
out fast and got even colder. So he set out to
change all that.
First he realized that good athletic shoes had
some common traits which made them superior
over the old style of flat tenny runners. These
included raised heels, hollow air chambers for
cushioning, side rails to keep feet firmly in place
and arch supports. Recognizing that these same traits would greatly improve a dive boot, he set about working with an
overseas manufacturer and they jointly developed the High Tide PRO boot.
Like a high end athletic shoe, the PRO has a lightweight sole with side rails and raised heel. It has air chambers beneath
the heel and toe areas to absorb shock. An arch support is built in. High Tide went farther and added a fin tab on the back
to keep your fin straps from slipping loose. Rubber vulcanized toes and heels protects the PRO from fin chafe. A neoprene
liner on the bottom inside of the boot is a full 8.0 mm thick for maximum warmth and cushion. An extra large #10 zipper with
water-tight gasket makes getting in and out of these boots easier while a loop and hook tab keeps the zipper zipped up. No
boot will last very long unless it is made from top quality neoprene so the PRO uses commercial grade with twin layers of
titanium foil for warmth and durability. Each boot is made from a true and full 6.5 mm thickness.
We honestly believe there is not a warmer or longer lasting wetsuit boot on the market. And thousands of happy divers
have agreed with us. If your feet are getting cold, maybe you should step up to the High Tide PRO.
The 6.5 mm PRO is available in sizes 3XS to 4XL Price- $79.95
overseas manufacturer and they jointly developed the High Tide PRO boot.
Like a high end athletic shoe, the PRO has a lightweight sole with side rails and raised heel. It has air chambers beneath
the heel and toe areas to absorb shock. An arch support is built in. High Tide went farther and added a fin tab on the back
to keep your fin straps from slipping loose. Rubber vulcanized toes and heels protects the PRO from fin chafe. A neoprene
liner on the bottom inside of the boot is a full 8.0 mm thick for maximum warmth and cushion. An extra large #10 zipper with
water-tight gasket makes getting in and out of these boots easier while a loop and hook tab keeps the zipper zipped up. No
boot will last very long unless it is made from top quality neoprene so the PRO uses commercial grade with twin layers of
titanium foil for warmth and durability. Each boot is made from a true and full 6.5 mm thickness.
We honestly believe there is not a warmer or longer lasting wetsuit boot on the market. And thousands of happy divers
have agreed with us. If your feet are getting cold, maybe you should step up to the High Tide PRO.
The 6.5 mm PRO is available in sizes 3XS to 4XL Price- $79.95
| The Pro Boot |
| Toll-free: 1-888-745-0755 High Tide Dry Suits, Inc. 11233 Bowe Lane SE, Port Orchard, Wa. 98367 Fax: (253) 857-0755 |
High Tide Dry Suits, Inc.
